My XDK sensor is not being detected in the workbench software.

I am facing the issue as seen in the image that I have attached to this message. My sensor Green light is continuous as it is charging and the red and yellow lights are blinking continuously. What should I do to solve this issue? Kindly let me know as soon as possible.

 

Thanks in advance,

Alberto

0 (0 Votes)
RE: Internal error occured . Discover devices
Answer
10/9/18 2:37 PM as a reply to Alberto Icardi.
Hello Alberto,

Could you please clarify, if both LEDs are continuously blinking or if only the red LED is blinking and the yellow LED is on?

If only the red LED is blinking and the yellow LED is on, is this indicating that the flashed application on the XDK invalid and the XDK is unable to boot.

In any case, you can simply force the XDK back into Bootloader mode by turning off the XDK, then keeping button one pressed and then turning on the XDK once again. This should force the XDK into Bootloader mode and the XDK should be recognized again by the XDK-Workbench.

Additionally, if it is still not recognized but the XDK-Workbench is not throwing an error, I recommend restarting the XDK-Workbench as well.

Please let me know if this was helpful and feel free to ask if you have further questions.

Kind regards,
Franjo
0 (0 Votes)