Please help code acceleration
Antwort
19.10.18 17:01
I started the program XDK for 4 days.I have made a project desing sest of truck for vibration absorption but I can not write code program XDK measure the acceleration in the Z axis 
To split out the acceleration value is.
0-0.005g electricity out of XDK 0.5 V
0.008-0.01g electricity out of the XDK 1V
0.013-0.015g electricity out of the XDK 1.5 V
0.018-0.02g electricity out of the XDK 2V 

please help me write code program XDK 

 

 

 

 

 

 

0 (0 Stimmen)
RE: Please help code acceleration
Antwort
22.10.18 11:00 als Antwort auf kriattisak Houdjaroen.
Hello Kriattisak,

First, I would like to welcome you to the XDK community.

I assume you are trying to implement an application, which reads out the different values of the accelerometer's z-axis. Since you seem to be beginner with the XDK, I strongly recommend to go through the beginners guides, which are available in the learning Section of the XDK community or to work through the getting started section within the XDK knowledgebase .

These can be accessed these after a free knowledgebase registration and a click at the button getting started .
In regards to your issue, I recommend you to take a look at the advanced guides in the learning section or the sensor and FreeRTOS section in the XDK knowledgebase.
Within these articles, you should be able to find everything you need to get your application work.

Please let me know if this was helpful and feel free to ask if you have further questions.

Kind regards,
Franjo
0 (0 Stimmen)
RE: Please help code acceleration
Antwort
27.10.18 15:33 als Antwort auf Franjo Stjepandic.
Thank you very much, Franjo
0 (0 Stimmen)
RE: Please help code acceleration
Antwort
29.10.18 16:06 als Antwort auf kriattisak Houdjaroen.
Hello Kriattisak,

I always glad to help.

If you have any additional questions, feel free to ask.

Kind regards,
Franjo
0 (0 Stimmen)