I followed every step on cloud connectivity guide (https://www.bosch-iot-suite.com/tutorials/cross-domain-development-kit-xdk-cloud-connectivity/) but I got error when I started application.

I build and flash project as it is and you can see the console view below;

 INFO | Connecting to XDK device 'XDK Device 1' in port 'COM4'...
 INFO | Connection to port 'COM4' established
 INFO | XDK DEVICE 1: ***
 INFO | Creating Firmware Over the Air (FOTA) Container
 INFO | Binary File: C:\Users\uerten\XDK-Workspace\BoschXDKCloudConnectivity\debug\BoschXDKCloudConnectivity.bin
 INFO | Header Version: 0100
 INFO | Product Class: 0010
 INFO | Product Variant: 0000
 INFO | Firmware Version: 00000000
 INFO | Flashing file 'C:/Users/uerten/XDK-Workspace/BoschXDKCloudConnectivity/debug/BoschXDKCloudConnectivity.bin'...
 INFO | XDK DEVICE 1: Ready
 INFO | XDK DEVICE 1: C
 INFO | XDK DEVICE 1:
 INFO | XDK DEVICE 1: XMODEM Download Success
 INFO | XDK DEVICE 1:  CRC of application area
 INFO | Application checksum '3de0' successfully verified.
 INFO | Transmission successfully completed!
 INFO | Booting application...
 INFO | XDK DEVICE 1: b
 INFO | XDK DEVICE 1:  Performing application CRC validation (this will take a couple of seconds)
 INFO | XDK DEVICE 1:  Jumping to application
 INFO | Port 'COM4' has been disconnected
 INFO | Connecting to XDK device 'XDK Device 1' in port 'COM4'...
 INFO | Connection to port 'COM4' established
 INFO | XDK DEVICE 1: Warning in XDK110 Application package.
 INFO | XDK DEVICE 1:     Package ID: 153
 INFO | XDK DEVICE 1:     Module ID: 50
 INFO | XDK DEVICE 1:     Severity code: 3
 INFO | XDK DEVICE 1:     Error code: 154
 INFO | XDK DEVICE 1: Firmware Version : v3.6.0-0.0.0 
 INFO | XDK DEVICE 1: Warning in XDK110 Application package.
 INFO | XDK DEVICE 1:     Package ID: 153
 INFO | XDK DEVICE 1:     Module ID: 50
 INFO | XDK DEVICE 1:     Severity code: 3
 INFO | XDK DEVICE 1:     Error code: 154
 INFO | XDK DEVICE 1: Application Configuration:
 INFO | XDK DEVICE 1: [               SSID] = [***]
 INFO | XDK DEVICE 1: [             STATIC] * [NO] (DEFAULT)
 INFO | XDK DEVICE 1: [           STATICIP] * [] (DEFAULT)
 INFO | XDK DEVICE 1: [          DNSSERVER] * [] (DEFAULT)
 INFO | XDK DEVICE 1: [            GATEWAY] * [] (DEFAULT)
 INFO | XDK DEVICE 1: [               MASK] * [] (DEFAULT)
 INFO | XDK DEVICE 1: [        LWM2MDEFSRV] = [***]
 INFO | XDK DEVICE 1: [      LWM2MENDPOINT] = [***]
 INFO | XDK DEVICE 1: [    DTLSPSKIDENTITY] = [***]
 INFO | XDK DEVICE 1: [   DTLSPSKSECRETKEY] = [***]
 INFO | XDK DEVICE 1: [DTLSPSKSECRETKEYHEX] * [] (DEFAULT)
 INFO | XDK DEVICE 1: [           TESTMODE] * [MIX] (DEFAULT)
 INFO | XDK DEVICE 1: [      LWM2MLIFETIME] * [240] (DEFAULT)
 INFO | XDK DEVICE 1: [       LWM2MBINDING] * [U] (DEFAULT)
 INFO | XDK DEVICE 1: [   LWM2MCONNOTIFIES] * [NO] (DEFAULT)
 INFO | XDK DEVICE 1: [    ACTIVATEDTLSPSK] is deprecated and should be removed
 INFO | XDK DEVICE 1: Missing STATICIP !!!
 INFO | XDK DEVICE 1: Missing GATEWAY !!!
 INFO | XDK DEVICE 1: Missing DNSSERVER !!!
 INFO | XDK DEVICE 1: Missing MASK !!!
 INFO | XDK DEVICE 1: WLAN_Enable : Preparing for Personal WPA2 connection
 INFO | XDK DEVICE 1: This is a CC3100R device
 INFO | XDK DEVICE 1: CHIP 0x4000000
 INFO | XDK DEVICE 1: MAC 31.1.2.0.2
 INFO | XDK DEVICE 1: PHY 1.0.3.23
 INFO | XDK DEVICE 1: NWP 2.2.0.1
 INFO | XDK DEVICE 1: ROM 0x3333
 INFO | XDK DEVICE 1: HOST 1.0.1.11
 INFO | XDK DEVICE 1: AppControllerEnable : Failed 
 INFO | XDK DEVICE 1: Error in XDK110 Application package.
 INFO | XDK DEVICE 1:     Package ID: 153
 INFO | XDK DEVICE 1:     Module ID: 53
 INFO | XDK DEVICE 1:     Severity code: 2
 INFO | XDK DEVICE 1:     Error code: 12
 INFO | XDK DEVICE 1: asserted at Filename C:/Users/uerten/XDK-Workspace/BoschXDKCloudConnectivity/source/AppController.c , line no  803 

 

XDK Workbench version -> 3.6.0

XDK Bootloader version -> 1.2.0
 

 

 

 

0 (0 Stimmen)
RE: BoschXDKClouldConnectivity AppControllerEnable Failed
Antwort
08.04.19 06:19 als Antwort auf Ufuk Erten.

Hi Ufuk

Are you using SDcard or AppController.h ofr giving the required credentials for registration.

Please use a good network connection .

If using SDcard donot change anything in AppController.h. Copy the config.txt from iot suite and change the username and password with your credentials.

Clean and build the application.

Thanks

Priyashi

 

 

0 (0 Stimmen)