XDK no response to Workbench
Antwort
14.07.19 05:57

Hi,

My XDK stops responding after a few weeks of installation.  I used workbench (V3.6) to connect it but the workbench cannot find XDK anymore.  I tried many times pushing the button 1 while switch off and switch on again to restart it to bootloader mode.  It did not work.  The XDK shows the steady red LED and steady green (charging) LED.  Tried using workbench on other PC, change USB cables, still cannot get it to work.

For your note other XDKs still work fine with my Workbench.

My questions are:

1. Is there a way to reset this XDK to resume its functions?

2. Or does this XDK alrady damage and unable to reset?

Regards,  

Sran S.

0 (0 Stimmen)
RE: XDK no response to Workbench
Antwort
16.07.19 08:49 als Antwort auf Sran Sribhibhadh.

Hi Sran Sribhibhadh,

Does XDK device is detected by your PC? Can you check it in 'Device Manager'.

Thank You :)

0 (0 Stimmen)
RE: XDK no response to Workbench
Antwort
19.07.19 00:12 als Antwort auf Karthiga Rajendran.

Hi,

Nothing this XDK behaves strange after return from installation.  The PC cannot see it on the device manager anymore so as the workbench.

I think it needs some kind of hardware reset.  Can anybody advise? 

Regards,

0 (0 Stimmen)