Debugger pinning
Answer
08/06/15 15:00
Hello,

we would like to be able to connect a debbuger like JLINK... Could we have the pinning of the XDK out port so that we could build the cable ?

 
0 (0 Votes)
Debugger pinning
Answer
08/06/15 23:23 as a reply to Nicolas CHATELAIN.
Hi cht1so,

if you like in the XDK Overview document, you'll find a description on how to use a debugger like the JLink with your XDK.

Quote:

2.3.6 Acessories Additionally, the J-link adapter “J-Link 9-Pin Cortex-M Adapter” can be purchased from Segger (http://www.segger.com). The adapter facilitates using JTAG to debug the program on the XDK 110. While ordering, refer to XDK 110 to get the right adapter.

Now if you search for the mentioned adapter, you'll find a PINOUT diagram and some more description on said adapter that should solver your question.
See: https://www.segger.com/jlink-adapters.html#CM_9pin
Also, see my attachment.

Regards,
Florian

0 (0 Votes)
Debugger pinning
Answer
24/07/15 08:11 as a reply to Manuel Cerny.
How can I configure the debugger. I got the message "Lauching XDK110_......out has encountered a problem. Error starting process"
I think there is some configuration missing.
0 (0 Votes)
Debugger pinning
Answer
24/07/15 13:55 as a reply to Nils Kornau.
Hi kornau,

could you explain your error and the environment you are working in a bit more please? I've never gotten that error before.
I also assume that you are using a Segger JLink device as your debugger, is this correct?

- Florian
0 (0 Votes)