Is my XDK dead?
응답
16. 6. 30 오전 10:18

Hello all,

After running about 1hour updating data to Bosch IoT Suite, my XDK stopped and has no longer regconized by the PC.

PC keeps installing XDK as unknown device (I tried with some other PCs, the same happened).

I also tried to uninstall and install driver, restart the PC, nothing works. :-(

Is my XDK dead? What happened actually?

0 (0 투표)
RE: Is my XDK dead?
응답
16. 6. 30 오전 10:27 as a reply to Trinh Tran.

Hello Trinh,

there is a pretty good FAQ side in this community, see here.
Please try the following and recover the XDK:

To recover XDK, please switch it off. Then press and hold button one and turn it on. Once the red LED comes on, release button 1. XDK is now in bootloader mode and should be recognized in XDK Workbench. This allows you to flash new software.

Afterwards, your XDK should be recognized normally.

Kind regards,
Manuel

+2 (2 투표)
RE: Is my XDK dead?
응답
16. 6. 30 오전 10:53 as a reply to Manuel Cerny.
Manuel, you are light of my life. Thanks so much :-)
0 (0 투표)
RE: Is my XDK dead?
응답
16. 6. 30 오전 11:27 as a reply to Trinh Tran.

Trinh,

nice to hear that it works now!
Let me know, if you have further questions.

- Manuel

0 (0 투표)