Download report automatically from loT
응답
16. 7. 22 오전 4:57
Now our team are using XDK sensor with loT. And our aim is to download the sensor data from loT to a fixed path in the local server. Does loT already have this function, or will be implemented afterwards. If not, how can we proceed with this problem. Thank you.
0 (0 투표)
RE: Download report automatically from loT
응답
16. 7. 22 오전 8:38 as a reply to Qiu Xia.

Hello Qui,

you can subscribe to the IoT mqtt server at mqtt.bosch-si.com:1883 and receive the sensor data stream with the following topic:

BCDS/XDK/single/XDK_Serial/out/stream
BCDS/XDK/single/XDK_Serial/out/report
BCDS/XDK/single/XDK_Serial/out/config

 
You need to replace XDK_Serial with the MAC address of your device (e.g. 54:4A:16:FF:FF:FF)
Alternatively, if you wanted to get the three (stream, report, config) at once, you can do the following:
 
BCDS/XDK/single/XDK_Serial/out/+

Kind regards,
Manuel

0 (0 투표)