Hi,

I am using the XDK MQTT sample code on the XDK and use the "bcds.bosch-si.com" server to access the data using a web browser and get an "Connection Failed. AMQJSC0001E Connect timed out." Error.

I took the following steps

  • registered device as subscriber according to getting started Step1
  • modified the live chart accoring to Step2

After finishing the changes on the live chart the browser tries to connect and shows the connection timed out error.

To exlude the ability that data are not delivered from the XDK to an MQTT server, I modified the source code to deliver data to another MQTT server (HiveMQ) , I could verify that the data are visible in the incoming stream with the topic name "BCDS/XDK/single/XX:XX:XX:XX:XX/out/stream" XX being the MAC address in capital letters. => data are delivered by XDK,  network  from XDK to server is fine.

Changing back the source code to "mqtt.bosch-si.com" and flashing the binary to XDK now should deliver data to Bosch Cloud. In this situation the connection error ocurs.

Hint: I am using firefox within a company network behind a proxy. However the error also occurs when I access the Bosch cloud using a smartphone, not using any company network.

Any suggestions?

 

0 (0 투표)
RE: MQTT Example: Web Client Access AMQJSC0001E Connect timed out.
응답
17. 1. 10 오후 3:11 as a reply to Thomas Woyke.

Hello Thomas,

thank you very much for your detailed description and analysis.

This issue is not related to your setup. I reproduced the same behavior that the data is successfully published by the XDK. Unfortunately this issue seems to be caused by an offline Bosch MQTT broker. I already forwarded this issue to the developers and keep you posted in the community.

Please feel free to ask, if you have further questions.

Kind regards,
Manuel

0 (0 투표)
RE: MQTT Example: Web Client Access AMQJSC0001E Connect timed out.
응답
17. 1. 24 오후 12:49 as a reply to Manuel Cerny.

Hello Thomas,

the Bosch XDK Portal is up again and runs stable.
Thank you very much for your hint.

Please let me know if I can help you with anything else.

Kind regards,
Manuel

0 (0 투표)
RE: MQTT Example: Web Client Access AMQJSC0001E Connect timed out.
응답
17. 3. 30 오후 3:40 as a reply to Manuel Cerny.

Hello Manuel,

 

I am facing the same Error Thomas had some time ago:

Connection Failed. AMQJSC0001E Connect timed out.

Is the Broker down again? 

 

Best Regards

0 (0 투표)
RE: MQTT Example: Web Client Access AMQJSC0001E Connect timed out.
응답
17. 4. 2 오후 10:28 as a reply to Emmanuel Martinez.

Hello Emmanuel,

I faced the same issue the broker seems to be down again.
I contacted the responsible developert to take care that the broker runs again.

I will keep you posted about the progress in this thread.


Meanwhile the only thing I can do is ask you for patience.

Kind regards,
Manuel

0 (0 투표)