Community news, upcoming events and general discussions
Threads: 36 Posts: 88
Get technical support from the community
Threads: 1427 Posts: 7608
Threads: 18 Posts: 64
Tell us how to make XDK better!
Threads: 36 Posts: 119
Share and discuss community member projects
Threads: 81 Posts: 350
I´m working now with the xdk for the first time, before I got some expirience with ardunio and first of all I want to know, if there is a project, I could start or some preference you did which is good to start with. I want to take expierince before I collect it with a raspberry pi or an arduino board.
I´m working inside an office and don´t know how to use it correctly or rather which use I can get from it.
If there are some project presented before, I would be glad if you could comment the link. Thank you for your support
thank you verry much for your fast reply. I already see the learning guides, but some how, I thought, I could copy an instruction for my better understanding.
I will now follow the steps in the guide and if I get problems I will ask again!
I have a short question. I want to know, if all the guides are translated in german? I mean, I understand everything good, but sometimes it would be helpfull to read them in german.
If not, it´s ok too.
therefore I couldn´t run. The option "external tools" is for running the program. But like you can see in the picture I uploaded, (what ever function I set oder reset) it won´t run/work. For example the Example Program in the workbench "LedandButton" only flashed on the XDK, but the run-function doesn´t work. I also searching an output window for the "hello World" test, to look, where or what the code is doing.
there are some options but nothing showed me, when the if-case work like this is printf("Output A/n"); , or the next if-case is printf("Output B/n");
Just a stupid question: where can I see the output when I want a easy print-out about the "printf();" function?!
Therefore I found a mising element beyond in the guide :)
have a nice weeknd!!!
I´m stupid. It was allways in front of my eyes XD
Hello Franjo, I hope you doing well.
I want to know, how I can connect with WiFi inside Bosch plant. There are some problems after all and if you have any idea how I can fix it, because of the SSID and the HTTP and whatever information with network password is secured by the IT.
I can´t connect with the WiFi, for my bad. I can send you a picture too. I tested the example "WlanNetwordManagement". Do I have to change the information inside the header file, SSID: XYZ and Password:XYZ?
Thank you verry much for supporting me!!!