XDK SIGFOX
응답
18. 8. 30 오전 8:21
Hello together,
finally our first sigfox XDK SensorSystem is now online.
We have made some small changes in the actually provided firmware from WB 3.4.0 to provide at first Illuminance Sensor Data every 15 Minutes in the testing phase.
Next step is to implement sigfox callbacks and API's to deliver the data to Dashboards and alerting systems. So stay tuned.

Greetings Achim
+2 (2 투표)
RE: XDK SIGFOX
응답
18. 8. 30 오후 2:15 as a reply to Achim Kern.
Hello Achim,

thank your for this update on your project.
These are great news, I am glad you are progressing so fast.

The IoT Community will be able to reach even bigger dimensions with these new possibilities in connection based projects.

Would you be so kind and share more informations regarding the software changes and hardware you currently use?

The best for your further progress.

Kind regards,
Franjo
0 (0 투표)
RE: XDK SIGFOX
응답
18. 9. 3 오전 11:53 as a reply to Franjo Stjepandic.

You can see the wing here and can order the parts now.

https://www.innocomm.com/product_inner.aspx?num=2209

1 Part ca. 90 USD + 15 USD Transaction fee

 

+2 (2 투표)
RE: XDK SIGFOX
응답
18. 9. 3 오후 2:58 as a reply to Achim Kern.
Hello Achim,

Thank you for linking the Sigfox extension module product page with the direct access to guides, informations and the product order itself.

It would be great, if you could share the link with the webview itself, too.

Kind regards,
Franjo
0 (0 투표)
RE: XDK SIGFOX
응답
19. 3. 13 오후 3:18 as a reply to Franjo Stjepandic.

Hello Achim,

My department recently bought two SigFox extension modules for XDK.

I tried to send messages to the SigFox backend but I cannot see the messages. I am using WB 3.5.

My question is Which parts of the code must be changed in order to make this example work?

0 (0 투표)
RE: XDK SIGFOX
응답
19. 3. 19 오후 6:50 as a reply to Bryan de Jesus Campos Dionicio.

Hello, here some hints what we have done.

We changed firmware - sending only sensor entry illuminance,
and sending frequence only every 15 minutes.

You have to register your XDK board correctly on the SigFox page under your account.

0 (0 투표)