Community news, upcoming events and general discussions
Threads: 36 Posts: 88
Get technical support from the community
Threads: 1409 Posts: 7545
Threads: 18 Posts: 64
Tell us how to make XDK better!
Threads: 36 Posts: 119
Share and discuss community member projects
Threads: 78 Posts: 343
I have just installed the Workbench, have plugged in the XDK Bosch into my computer but it seems like the Workbench isn't able to find the device. Currently, the most left button shows a green light, the most right button shows a red light. The two middle lights are off.
Can someone help me out with this one?
Try the following things:
1. Try to refresh the devices available as shown in the below image.
2. Check whether the COM PORT is not used by any other application eg:Teraterm , HTerm etc
3.Try restaring your PC
4. Check whether the device is visible in Device Manager --> PORTS. If not visible then try flashing the bootloader and go to bootloader mode by truning on the device and pressing button 1.
Hope this helps