Community news, upcoming events and general discussions
Threads: 36 Posts: 88
Get technical support from the community
Threads: 1427 Posts: 7608
Threads: 18 Posts: 64
Tell us how to make XDK better!
Threads: 36 Posts: 119
Share and discuss community member projects
Threads: 81 Posts: 350
I did not have this error when I was working with XDK yesterday and today I tried to change port and flash XDK but I got this error :
ERROR | Could not set device 'XDK Device 1' into bootloader mode
version of workbench : 3.4.0
project name : SendAccelDataOverUdpAndBle
steps : clean ~ build project ~ flash
Can you try going to bootloader mode manually i.e pressing button 1 and turning on the device to check if it goes to bootloader mode
And after that clean -->build -->flash your appplication.
Dear Priyashi Yadav ,
Thank you for your response .I did that process you mentioned and fortunately I did not get error again but after Flash, nothing change in sensor .Still previous code is working ,what should I do?
Thank you ,
As per your response I understood that you are not facing the issue again.
But I couldnt understand What are you trying to do.
Could you be more clear.
I did the process you mentioned for 2 times and It worked.but if I want to flash it I need to do that process every time ! but the problem solved . Thank you so much.