XDK with Zigbee Network
응답
15. 11. 17 오전 4:43
Hi There, I tried to use our XDK to work with the CC250 to establish a Zigbee network. The XDK communicates with CC2530 through the UART interface and work as the end device, the coordinator is other CC2530 evaluation board. The end device updates the sensor data every second and show up on the screen of the coordinator. If you guys have any interested in the Zigbee, I can upload my project later. Thanks and Best Regards, Ken
0 (0 투표)
XDK with Zigbee Network
응답
15. 11. 17 오전 4:46 as a reply to kun wang.
Hi Community,

  I can't edit my post and the picture doesn't show up.
would you please help to check for it?



ken
 
0 (0 투표)
XDK with Zigbee Network
응답
15. 11. 20 오전 9:00 as a reply to kun wang.
Hi Ken,

there's currently a problem with the image upload, we're working on getting that fixed.

Once that's done, I would be more than interested in seeing your project and your whole setup. 
Until then, I understand that the CC2500 is only the chip used to connect to the Zigbee network, what kind of development platform do you use that is connected to the XDK?!

- Florian
0 (0 투표)
XDK with Zigbee Network
응답
15. 11. 23 오전 7:45 as a reply to Florian Harr.
Hi Ken,

sorry for the inconveniences, as Florian said there are currently some issues with the image upload. Also there is currently no way you can edit your post, but we are working on a new and better community version which will be coming in the near future!

I will give you an update as soon as the problem has been fixed.

Thank you!
0 (0 투표)
XDK with Zigbee Network
응답
15. 11. 27 오후 12:35 as a reply to Marc Staller.
Ken,

as it seems that the image problem can't be solved ad-hoc, I can offer you email support and you can send me your screenshots via email.

To do so, I would like to ask you to post your email address for me here.

- Florian
0 (0 투표)
XDK with Zigbee Network
응답
15. 11. 30 오전 12:49 as a reply to Florian Harr.
Hi Marc & Florian,

   Thank you for your information and help about this post. I can send you guys about my email address:
 ken.wang3@cn.bosch.com.
   In terms of this Zigbee network project, I chose the IAR for the IDE development tool for the software design.

   
  Thanks

  ken
 
0 (0 투표)
RE: XDK with Zigbee Network
응답
16. 10. 4 오전 10:30 as a reply to kun wang.

Hi Kun Wang,

 

May I have more information about your project, or shall we discuss more? I am actually doing the same thing and use the same workbench! I am excited to found someone else have experience on it. This is my email and you can contact with me directly:jiayifan21@gmail.com.

Best,

Yifan

0 (0 투표)